[pureline]Mogami 2534 Plated Lightning T...

NOTE

▲Please allow 1-3cm (0.4-1.18″) difference due to manual measurement and slight color variation for different display setting.

★★ lightning USB B, usb-b equipment needs to have independent power supply and the power supply should be greater than 5V, otherwise it will be unable to use due to insufficient voltage.
★★ IOS system requires software version greater than 10.4, otherwise it cannot be used.

Specifications

Interface type:LIGHTING to type c
Wire:mogami w2534
Wire diameter:6.0mm
Wire material:OFC(Oxygen free copper)
Plug:Gold-plated USB coating 3U
Plug material:Copper
Welding:Hand soldering using 5% silver solder

▲If you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you.

Introduction

▲NEGLEX type Quad Cables have been developed for the highest quality recording applications where maximum definition of recorded sound is of critical importance. Special proprietary materials & construction methods make those state-of-the-art mic. cables a must for direct to DISC and digital recording. Basic matters of flexibility, microphonics and shielding effect have been designed to meet international professional requirements. A Balanced quad structure is effective for high definition sound transmission as well as in canceling electromagnetic induction caused by nearby equipment such as floodlight projection, and therefore is well adapted to motion picture and TV studios.

▲Cable NEGLEX No.2534 has become popular around the world as the standard for high quality digital and analog recording. The cable has also become popular for use with unbalanced equipment, such as high quality pre-amp, amp inputs and tape decks.

A. 100% spiral oxygen-free copper shield
The shielding layer adopts ultra-high-density spider spin oxygen-free copper shielding. The design of this shielding layer is superior to the sound quality of aluminum foil or braided shielding, and can effectively shield electromagnetic and radio frequency interference. Avoid annoying background noise, hum, hum.

B. High temperature resistant insulating layer
The insulating layer uses xLPE (cross-linked polyethylene), which has very good electronic properties and can prevent the shrinkage of the wire when it is welded at high temperature.

C. Oxygen-free copper core
OFC oxygen-free copper core. Although the copper content is as high as 99.99%, the signal loss is small and the sound is more pure.

D. Soft PVC
Wear-resistant, easy to bend, long service life of wire.

▲The lightin / type-C connecting joint adopts the shell design of the whole basin, which can ensure long-term reliability and convenience.
▲The plugs have beautiful nickel plated copper tin alloy grip barrel, and the granular surface can avoid finger sliding.
▲The length of the holding barrel exceeds that of the outer conductor sleeve, so the RF screen closing is improved.
▲It has a smooth appearance and is made of nickel plated alloy, which can prevent static electricity and electromagnetic nois

▲The welding is purely manual welding, and the solder joints are made of lead-free solder containing 5% silver with constant temperature welding, and each solder joint is full and smooth.

▲Each welding point is sealed with a heat shrinkable tube after welding to improve the oxidation resistance of the welding point and ensure a long sound

▲The same, while improving the tensile resistance and durability of the wire.

SPECIFICATIONS

▲Part No. :2534
▲No. of Conductor
Details:20/0.12 OFC
Size(mm2 ):0.226mm2 (#24AWG)
▲Insulation
Ov. Dia. (mm) :1.6(0.063″)
Material:XLPE( Cross-Linked Polyethylene )
Colors:Blue/Clear
▲Shield:Served Approx. 62/0.18A
▲Jacket
Ov. Dia. (mm) :6.0(0.236″)
Material:Flexible PVC
Colors:Black

Physical display