Diving Flashlight Bright light CERR LED ...

Specifications:

Name:A8

Diving Flashlight

Material:
Aluminum alloy + High density hard plastic

Emitter
type: 1 x CREEL2 LED

Battery
configuration: 3 x18650 battery (built-in)

Brightness:
3000 lumens maximum brightness

Waterproof:
underwater: 100 meters

Beam angle: about 56 degrees

Switch:high light/low light

Weight:
936g (built-in battery)

Shell
color: Yellow

Scope
of application: diving, fishing

Operation Instruction:

The side switch to control all function:

● Click to open flashlight, high-low

● Turn the switch to the right to lock the switch, you don’t have to worry
about water pressure when diving

Maintenance Tips:

1.You need to tighten the body of the flashlight and
the lamp head.

2:Note that the flashlight is very powerful and
requires a lot of current. It is recommended to use a power battery, the
battery discharge rate can reach 3C/ 5C
If your battery current is very small, the white light of the flashlight will
not work.
3:Appearance precautions, the flashlight supports the use of a pointed battery,
the flat battery cannot touch the circuit board, and the flashlight cannot be
used normally

4.Do not shine the light beam directly into eyes.

5.Do not installing the battery reverse polarity.

6.After use you should wash your diving lights
thoroughly in fresh water along with the rest of your equipment.

7.Clean, lubricate and inspect the O-rings,that would
better for the flashlight’s long-term use.

8.Clean the battery and electrical contacts.

9.Store your scuba diving lights without their
batteries to prevent any possible corrosion from battery leakage.

10.Always recharge the battery when the light goes
dim, thus overwork of batteries can be avoided and lifetime could be extended.

11.Store your dive lights in a cool dry place out of
direct sunlight.

Packing list:
1*Professional diving flashlight (built-in battery)
1*rope
1*DC charger

2* “O” type waterproof ring

1*Waterproof glue