XHP70.2 LED Diving Flashlight Tactical 26650 Torch Yellow/White Light 4000 Lumen Underwater 100M Waterproof XHP70 dive lamp
Features
Name: Diving Flashlight
Bulb: XHP70.2 LED (second generation PXHP70 lamp beads, better focusing effect)
Light color: White Yellow light
LED life :Over 100.000 hrs
Beam distance: about 490 meters
Beam angle: about 56 degrees
Original CREE XHP70.2 chips,
Switch: Click to open/long press to close.
4 mode: high-medium-low-flash (double-click to enter flashing)
Push switch with LED display: (green for full capacity and red for lack of capacity)
Waterproof: 100M Underwater Waterproof, Durable, lubricated double O-ring sealsfor twice the security to function under water
Reflector: Aluminum Reflector
Voltage: 7.4v-8.4v
Weight: ( 395 g ) (battery not included)
Uses: Ideal for diving, camping, hiking, mountaineering, hunting, fishing …
Size: Length: 23.9 cm, head diameter: 6.0 cm, shaft diameter: 3.8 cm
Operation Instruction:
The side switch to control all function:
– Click to open flashlight, high-medium-low-flash (double-click to enter flash mode)
– Press and hold the switch for 2 seconds to turn off the flashlight
SUPER-BRIGHT
4000 Lumens CREE XHP70.2 LED with high brightness
and its irradiation distance is about 400-600 meters
Power supply:
Operating voltage 6.8 V -8.4V, Support 2* 3.7v 26650 battery. (Battery NOT Included)
Note that your battery will affect the flashlight brightness. Power battery is recommended.
Packing List
Package A :
1x Diving Flashlight(Without battery ,charger)
1x Lanyard
Package B :
1x Diving Flashlight
1x Lanyard
2x 26650 battery
Package C :
1x Diving Flashlight
1x Lanyard
2x 26650 battery
1x AC Charger (Input: AC100V-240V 50/60Hz, Output: DC 4.2V 1.5A Compartible with: Li-ion battery 18650 26650)
We have US/UK/EU/AU Plug for AC Charger, Please note which plug you want in the order. Thank you!
Note: The XHP70.2 LED is high electric current consumption, if your 18650 battery have not enough output current, even our flashlight are in good condition, it can’t working successfully due to not reach the minimum current requirement.
Maintenance Tips:
1.Do not shine the light beam directly into eyes.
2.Do not installing the battery reverse polarity.
3.After use you should wash your diving lights thoroughly in fresh water along with the rest of your equipment.
4.Clean, lubricate and inspect the O-rings, that would better for the flashlight’s long-term use.
5.Clean the battery and electrical contacts.
6.Store your scuba diving lights without their batteries to prevent any possible corrosion from battery leakage.
7.Always recharge the battery when the light goes dim, thus overwork of batteries can be avoided and lifetime could be extended.
8.Store your dive lights in a cool dry place out of direct sunlight.