Attention Please :
The WS2811 LED Lights String Must Use DC5V Power Supply. Otherwise, It will burnt out.
This is the strings with LED on it, not include male/female connectors and controller, power supply…. You should buy these components separately
Specifications:
Working Input Voltage: DC5V
Output Power: 0.1W/pcs led.
Emitted Color: WS2811 RGB IC,addressable RGB full color
Color Order:G R B (not RGB)
LED Space:15mm/25mm/50mm/100mm pitch
LED quantity:one LED as one pixel(addressable);total 1000ct/string
Power injection:suggest to add voltage at every 100 LED
Wire color:27AWG all Clear 3PIN wire (VCC+,DATA,GND)
Wire length:
1.5m wire spacing; so 1000 pixels/string is 15m long
2.5cm wire spacing; so 1000 pixels/string is 25m long
5.0cm wire spacing; so 1000 pixels/string is 50m long
10.0cm wire spacing; so 1000 pixels/string is 100m long
View Angle: 360 degree.
Long Life:more than 50000 hours.
Working Tempreture: -20~50°.
Waterproof level:IP67 Waterproof
Warranty:2 Year.
Warm Tips: for this 1000ct/3000ct pixels string, you can not light them up without adding power injection every 200-300 pixels, so need to cut them up to use.
Individually Addressable WS2811 RGBIC Chip:Dream full color Programmable LED String. Chasing Lighting, Rainbow ,Fire ,Meteor, rhythm, etc all kinds of scenes and special effects.
Each LED can be cut off without damaging the rest strip. You can shorten, lengthen or bend it freely if you want.
DIY Controllers: Each pixel can have its own color and brightness as your wish. Compatible with Arduino, Raspberry Pi, Teensy, T1000S,K1000C etc programmable controllers. Support SP110E SP105E SP108E SP110E SP601E etc Bluetooth APP IR controllers, CSY07 CSY08 X2 SP106E SP107E SP601E SP608E SP611E etc music bluetooth APP controllers,SP511E SP501E etc smart WiFi Alexa music Controllers.
Wiring Diagram
1.5/2.5cm How to Connect to controller
1.5/2.5cm LED space strings don’t have enough wire to connect to controller, you should add a extension cable, we will off you the cable