10.26″ 4K Dash Cam ADAS Wireless C...

Support Driving Habit Selection:

According to your demand,Choose Left driving mode or Right Driving mode

Note:Not support huawei mobile phone

Regarding wireless Android Auto connectivity, it supports phones with Android 10 and above. For phones with Android versions below 10, only wired connectivity is supported.

Various Display Mode

Our products support UI full screen and split screen.In carplay/Android auto mode,it supports front/rear view full screen,front/rearview split screen,full map,map+music,map+music+front/rear view dashcam,map+musci+front and rear view dashcam.You can choose display mode according to your requirement.

Buit-in Speaker+FM Transmitter + AUX Audio Output

Listen to music through different ways.

(3) AUX audio output: By using an AUX cable to connect with the vehicle’s AUX interface, you can directly enjoy the original sound quality of the car. Low noise, high fidelity.

In Carplay/Android Auto mode,supports Siri/Google voice control.Free your hands and enjoy more safer driving experience.

With 5GHz High-speed WiFi

Real Time Reverse View

Support 1080P full screen reverse image and with guide line.When reversing, the system will automatically turn on the high-definition reversing camera at the rear of the car and clearly display the state of the rear of the car on the reverse IPS screen, so that you can accurately grasp the road conditions at the rear. The preview angle can be adjusted by sliding the left side of the screen to control the position of the guide line.

With 24h Parking Monitoring

Allows you to connect dash cam to a vehicle battery source, get constant power supply from the battery directly, so your car DVR will keep work even when ignition is off. (Hardware kit required, NOT included in the packaging, purchase separately)

Packing list:

1 x 10.26″ Car DVR
1 x Car Charger
1 x 3M GPS Antenna(Optional,depend on your choice)
1 x 6M Rearview Camera(Optional,depend on your choice)
1 x AUX Cable（Optional,depend on your choice）
1 x Manual

Note:The no front cam version doesn’t have USB port,not support wired carplay&android auto

FAQ:

1: Is this device suitable for my car?

This is a 10.26″ universal car radio, just fix it on the center console.

2: How to connect wireless carplay/android auto?

First pair the mobile phone with Bluetooth, and then connect to the WIFI signal. After both are connected, carplay/android auto will automatically jump to the corresponding interface.

3: How to connect wired android auto/carplay?

It can be connected through the USB 2.0 cable, please pay attention to use the original car cable that can be used for data transmission.

4: Why is there no sound from the device?

1. The AUX cable is inserted and the FM transmitter switch is turned on.

2. When the FM transmitter switch is turned on, the speaker has no sound.

5: Is it possible to transmit audio to the car’s speakers via Bluetooth?

Yes,In our new version.It support transmitting audio to car’s speaker via Bluetooth.If the device you received does not have this function, it means that your device is not the latest version, please contact us and provide us with the corresponding version number of your device. We will send you updated firmware.

6: How to sync sound via FM?

A:Turn on the radio function of the original car and choose the channel you like;

B: Turn on FM and tune to the same channel(Can be added to most 3 Favorites).The device will sound through the horn of the original car;

7: How to sync sound via AUX ?

A:Switch the car audio system input mode to AUX mode
;

B: AUX outputs all the time,plug and play.Default FM and Native Speaker will be turned off automatically when AUX mode is ON.

8: Why doesn’t the screen light up?

(1). Check whether the power supply is plugged in properly(connect with type-c port next to AV port).One end of the cigarette lighter is installed in place,and the other end will be connected to the lowermost DC 12V power supply port on the left side of the device.

(2). After confirming that the power is turned on, if the screen is still not on, there is a reset button on the back of the device, press and hold for 3 seconds.

(3). Software problems, you can upgrade the software, please contact customer service.

9: What should I do if the picture of rear camera is shaking ?

(1).Please Check whether the rear camera line is plugged in AV port properly(Note:should connect the rear camera at first,then power on machine)

(2).Then restart the device

10:Can I use the rear camera of the original car/other brand?

No, only the rear camera of Imagebon is supported, the camera of the original car/other brands is not suitable for the device

11:How to complete the update?

Please message us on Aliexpress,and give us your version number or version picture.At the same time,please leave us your email address.

We will check your version and send you the corresponding upgrade firmware.

Note:Please do not update the software at will after getting the update software from other places (because the update firmware corresponding to different versions is different, random update will cause damage to the machine)