FSD AP Assist Auxiliary Chip For Tesla M...

FSD AP Assist Auxiliary Chip For Tesla Model Y Model 3 2017-2023 Autopilot Nag Elimination Module Steering Wheel Module

Please confirm before puchasing: (Very Important)

1. To test after turn on assisted driving, manually turning the left or right wheel scroll can eliminate the hands-off prompt or not; if it can, our module can work, if not, it can not work in your car
2. The newest chip module has udpated to car system version 2023.44.30.8, suggest install on left side of the steering wheel
3. For future OTA updating, we support that and will udpate you instructions in the future, you can contact us by email or messages
4. Every module will be tested before shipping, so if you find it can not work in your car, please contact us to solve problem first
5. If you have any questions about installation or need detailed install video, please just feel free to contact us for more videos

How The Chip Module To Work?

After installation, the chip will automatically simulate rolling knob every 5-10 seconds. In order to achieve simulating manual operation on the steering wheel to avoid triggering “No Hands” Warning from Autopolit System

Features:

✅ Compared with the weight ring, this module can not only eliminate noise, but also set the automatic driving time interval without affecting the appearance of the steering wheel and making it easy to use. For long distance driving, this module is a better choice.
✅ This module is used to shield Tesla Autopilot hand-held steering wheel prompts and eliminate nag. Relieve shoulder pain and fatigue. This will make your long drives easy and enjoyable.
✅ The working principle of this module is that the module is installed behind the steering wheel and turns on the Eliminate Nag Mode. By default, the volume adjustment is triggered every 5-10 seconds, simulating hand rolling of the wheel, and the timing time adopts a random mechanism, which truly simulates the uncertainty of manual operation. (Installing the left roller can trigger volume adjustment, and installing the right roller can trigger speed adjustment)
✅Applicable to Model 3/Model 3 Performance/Model Y/Model Y Performance from 2017-2023. Compatible with yoke steering wheels and factory round steering wheels.
✅ 5-minute non-destructive installation. No need to remove screws and disconnect wires, does not affect the warranty, and can be restored to its original state at any time.
Support online OTA upgrade.
✅ You can set the buzzer volume, trigger time, random trigger, automatic exit time, save status, etc. If you need detailed methods and installation videos, please contact us.

Product Instructions:

✅ After installing the product and entering automatic driving mode, press the knob twice and you will hear a beep, which means you have entered chip simulation mode. The chip will automatically adjust the cruise speed according to the+1-1 rule at regular intervals, achieving the effect of simulating manual operation to adjust the cruise speed, so that the system will not experience no hand warning

How to Exit Simulation Mode

✅ Press the brake (it will also exit automatic driving mode)
✅ Press the knob twice (the car itself will remain in autonomous driving mode and only exit chip simulation mode)

BEFORE BUYING TIPS

✅ Not fit model 3 Highland 2024
✅ The vehicle must have a roller to eliminate the vehicle prompt module for application!
✅ This product is not a safety device. Improper use of this product can cause injury or accident.
✅ The device is only used for closed road sections, not for public roads. Please use it under your local rules.
✅ Your hands MUST remain on the steering wheel at all times for safety while driving