LASER TREE 80W Laser Module with Air Ass...

Professional 80W Laser Module with Air Assist

By LASER TREE

Upgraded LT-80W-AA-PRO:

1. Powerful Air Assist Nozzle

The laser head is equipped with a specially designed air-assisted nozzle.Pro has an upgraded nozzle compared to the previous AA. The difference of this nozzle is that it has an advanced hydrodynamic design that makes better use of air pressure. When using the same air compressor, the upgraded version has a faster jet airflow.
Recommended inner diameter of air tube: Φ4mm,outer diameter: 8x6mm
Air pump suggestion:Air pressure and capacity: ≥0.027kPa, 27L/min

NOTE: To take full advantage of the air assist feature, it is recommended that you use it together with the air pump.

2. Magnetic protective cover

Equipped with a removable magnetic protective cover. Whether it is engraving or cutting, you can use this protective cover to filter blue light, you can work without laser goggles, safe and convenient.

3. High Power Laser Module

2-Beam compression technology, 10W optical power laser module

4. Powerful Cutting Ability

Cut 8mm bass plywood: 120mm/min,100% power,by one pass
Cut 5mm black acrylic: 50mm/min,100% power,by one pass
Cut 5mm MDF: 150mm/min,100% power,by 2 passes

5. Professional Air Assist

Blowing through the air nozzle to get clean-cut edges, improve cutting performance

6. Super Fast Engraving Speed

Ultra-fast engraving on stainless steel-30mm/s

7. Widely Compatibility

Suitable for Z*aitu,O*tur,Tw* Trees,S*ulpful9, Xtool, A*omstack and other models of DIY laser engraving machines

Specification:

Material: aluminum alloy

Effect output power: 80W

Optical Power：10W (±1W)

Wavelength: 450nm (±10nm)

Light color: blue

Focus Length: 45mm

Spot form: Punctiform, fixed focus

Electric power: 12V 3.2A(3A-3.5A); 24V 1.7A(1.5A-2A)

PWM Modulation: 0/3-12V 1-5kHz, 0V off and 3-12V on

Input port: XH2.54-3P socket

Professional Air Assist

Upgraded 6mm diameter air nozzle has an advanced hydrodynamic design, which better reduces air resistance and faster jet airflow.
Recommended inner diameter of air tube: Φ4mm, outer diameter: 8x6mm
Air pump suggestion:Air pressure and capacity: ≥0.027kPa, 27L/min

With Air Assist VS No Air Assist

Blowing through the air nozzle to get clean-cut edges, improve cutting performance
without Air Nozzle:  Scorched Edges
with Air Nozzle:  Clean-Cut Edges

Dual-LDs with Beam Compressed Technology

One laser module has two built-in laser diodes.The optical power of each diode is 5W.

With beam combination technology, our laser module is double powerful and the beam quality is as good as a single diode.

Powerful Cutting Ability

Cut 8mm bass plywood: 120mm/min,100% power,by one pass
Cut 5mm black acrylic: 50mm/min,100% power,by one pass
Cut 5mm MDF: 150mm/min,100% power,by 2 passes

Minimum 0.08mm Ultra-thin Beam

Ultra-fast engraving on stainless steel-30mm/s

Widely Compatible Design

Suitable for Z*aitu,O*tur,Tw* Trees,S*ulpful9, Xtool, A*omstack and other models of DIY laser engraving machines

Reference Settings for Cutting

Magnetic Protective Cover

With a laser protective cover, it can effectively filter blue light when engraving or cutting with laser head, safe and convenient

Replaceable Protective Lens

Upgraded brass protective lens, more durable

Lens Maintenance

When the laser module is not used for a long time, please ensure that the lens is not polluted by dust.

When you replace the air nozzle, please ensure that your operation will not pollut the lens. Finger prints or dust on the lens will weaken the output power of the laser module, or even damage the lens.

When you find the cutting ability decreases, the lens might be not clean. Please use a clean alcohol swab to clean it according to the following figure.