LAUNCH X431 CRP129E PLUS Car Diagnostic Tools Full Systems SAS OIL Brake DPF 8 Services OBD2 Scanner 2 Years Free Update

LAUNCH CRP129E OBD2 Code reader Scanner ,full Systems Diagnostic , Reset Oil / EPB / SAS / Electronic throttle / Tire pressture / Injector / DPF / BMS, with Battery Test & Auto VIN Function , Wi-Fi One-Click Update Lifetime Free , Android 7.0 OS, 11 Language Support , Full OBD2 Functions

LAUNCH CRP129E Plus is the Update version of CRP123E , it supports All Systems Diagnose Function to the car . Will not be disappointed to Own it !!!

LAUNCH CRP129E Plus is with 2 Years Online Free Update , Lifetime Free Use !!!

LAUNCH CRP129E PLUS supports 11 Languages :

English, Spanish, French, German, Italian, Russian, Japanese, Korean, Portuguese, Polish, Korean, Chinese

LAUNCH CRP129E PLUS supports All Systems Diagnose Function

Engines/Auto Transmission/Airbags/
Immobilizer/Key Coding/ABS/Cruise Control/
Instruments/ Self Leveling Suspension systems/
Seats/Doors/Gateway/Steering Angle/Air Suspension/Body Systems/Electronic Power Steering & Motor Assisted/Power Steering/Tyre Pressure/Rain Sensors/4WD System/
Stabilizer/Intelligent Parking Assist/Door Motors/Audio Systems/Air Conditioning/Tiptronic/Anti Theft/Soft Top/Headlamp Leveling/Central Locking/Automatic Clutch/ DPF Reset/Electric Windows/Plip Programming/Heated Rear Window/Xenon Headlights/Wash Wipe/Fuel Burning Heater/Transfer Box/Seat Memory/Oil Life Service Reset/Sliding Doors/Electronic Throttle/Navigation System/Rollover Sensor/Cruise Control/ Multi Function Steering Wheel/Aux Heating/Electronic Parking Brake/Clutch Electronics etc.( Great for car repair shops and mechanics to improve business)

It supports the detailed Function :

–read fault codes: read and decode the DTCs to identify where the fault location is;
–clear fault codes: erase the DTCs to turn off the MIL after repairs;
–retrieve ecu information: allows you to retrieve vehicle information;
–Graph live data stream: view the dynamic data stream to determine vehicle condition

With the Diagnose Function , you can enhance performance, save energy, reduce emissions and more as following:

For Engine: detect common issues as Poor lubrication, Failing oil pump, Oil deposits and debris, Inadequate fuel and air compression, Leaking engine coolant, Blocked engine radiators, Prolonged engine detonation, Damaged oxygen sensors, Aged spark plugs, etc.

For SRS: pinpoint the trouble area as: a bad seat belt, a corroded crash sensor, or some water intrusion in a connector, etc.

For ABS: diagnose Blown sensor fuse, Low brake fluids, and Faulty sensor, etc.

For Transmission: avoid Grinding or shaking sensation in gear, Whining, humming or clunking noises, Burning smells, Gears Slipping, Low or Leaking Transmission Fluid, etc.

For TPMS: verify problems of Low tire pressure, Faulty in tire pressure monitor control module, Unknown tire sensor, Failure to identify tire sensor, etc.

Effortlessly Do the Maintenance by Yourself – 8 Built-in Reset Functions, Purchase More from MALL Menu

Have you ever encountered the below situations?

1. The annoying fault light on the dashboard came on and wouldn’t go off.
2. Spending a long time driving to the repair store to turn off the light.
3. Spend a lot to reset replacement parts and turn off the malfunctioning light.
4. The OBD2 scanner CRP129E Plus will provide solutions to these issues for it has five commonly-used reset features: Oil Reset, Steering Angle Calibration, EPB reset, TPMS Reset, and Throttle Adaptation.

How would oil reset helps your work?

* If the service lamp is on, you need to reset the driving mileage or driving time so that the service lamp turns off and the system enables the new service cycle.
* After changing engine oil or electric appliances that monitor oil life, you need to reset the service lamp.

How would steering angle calibration help you?

* After replacing the steering angle position sensor, steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering the car body, use CRP129E to reset the steering angle.

When would you use the EPB Reset?

* The brake pad and brake pad wear sensor are replaced.
* The brake pad indicator lamp is on.
* The brake pad sensor circuit is short, which is recovered. The servo motor is replaced.

How would TPMS reset help you?

* After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL.

When would you use throttle adaptation?

* The ECU is replaced and the ECU does not yet store throttle working features.
* The throttle assembly is replaced or the throttle is cleaned.
* The intake pipe is replaced or removed.

How would Battery Maintenance System Reset helps you work ?

This function enables you to perform a resetting operation on the monitoringunit of vehicle battery, in which the original low battery fault information will becleared and battery matching will be done.
lt needs to be performed in the following cases:
1. The main battery is replaced.
2. The battery monitoring sensor is replaced.

How would Diesel Particulate Filter (DPF) Regeneration helps you work ?

This function enables you to clear PM(Particulate Matter) from the DPF filterthrough continuous combustion oxidation mode (such as high temperatureheating combustion,fuel additive or catalyst reduce PM ignition combustion)to stabilize the filter performance.
lt needs to be performed in the following cases:
1. The exhaust back pressure sensor is replaced.
2. The PM trap is removed or replaced.
3. The fuel additive nozzle is removed or replaced.
4. The catalytic oxidizer is removed or replaced.
5. The DPF regeneration MlL is on and maintenance is performed.
6. The DPF regeneration control module is replaced.

How would Injector Coding helps your work ?

This function enables you to write injector actual code or rewrite code inthe ECU to the injector code of the corresponding cylinder，so as to moreaccurately control or correct cylinder injection quantity.
lt needs to be performed in the following cases:
After the ECu or injector is replaced.

LAUNCH CRP129E PLUS Battery tester Function – Real Time Battery Voltage Graphing

Check the battery status in real time and eliminate the most easily overlooked battery problems

LAUNCH CRP129E PLUS Auto VIN Function – Quick VIN Identification

The CRP129E PLUS is an easy-to-use scanner aiming at helping you solve automotive issues quickly and accurately. In addition to manually selecting the vehicle information like year, make, model, and VIN, you can quickly access the system via AutoDetect for VIN acquisition.

LAUNCH CRP129E PLUS Supports Full obd2 Function which are Ready for Engine System

$01 – Request Current Powertrain Diagnostic Data

$02 – Request Powertrain Freeze Frame Data

$03 – Request Emission-Related Diagnostic Trouble Codes

$04 – Clear/Reset Emission-Related Diagnostic Information

$05 – Request Oxygen Sensor Monitoring Test Results

$06 – Request On-Board Monitoring Test Results for Specific Monitored Systems

$07 – Request Emission-Related Diagnostic Trouble Codes Detected During Current or Last Completed Driving Cycle

$08 – Request Control of On-Board System Test or Component

$09 – Request Vehicle Information

$0A – Request Emission-Related Diagnostic Trouble Codes with Permanent Status

LAUNCH CRP129E PLUS Other Function :

Live Data Stream Analyse in Graph

The launch scanner CRP123E shows you live sensors data and provides data graphing for intuitive diagnostics and monitoring your vehicle performance, help customers to better analyze the abnormal parameter.

Date Record & Playback

Another great feature about this automotive diagnostic scanner is that it would allow you to view the Live Data Stream, and to record the data in Waveform. This would save you the hassle of reading through and digesting all the information which is being presented to you. You can even playback these data, for better analysis and rectification as well as future use.

Google DTC Inside

After you get the diagnosis results, quickly get the maintenance information through the built-in Google DTC system.

Professional, efficient connection of Internet mass information, easy to improve hands-on ability

Share Report via Wi-Fi & print Report

Rather than taking the additional hassle, with this LAUNCH scanner, you would easily be able to share the diagnostics report to your clients or technicians via Wi-Fi. They would take a look at the full, clear, and accurate diagnostic report, and then understand what would need to be done. No more Googling unreliable fixes that would waste your energy.

LAUNCH CRP129E PLUS Update – 2 Years Free Update via WIFI, One-Click update , Lifetime Free Use , easy to Operate !

LAUNCH CRP129E Plus supports Over 10000 Car Models,Up to 57 Brands:

For VW, For NISSAN, For EOBD2(EOBD2), For VOLVO, For MITSUBISHI, For Dodge, For Vauxhall, For Mini, For DEMO, For USAFORD, For MAZDA, For DAEWOO, For TOYOTA, For Lincoln, For DACIA, For Tlisuzu, For Lexus, For CITROEN, For SUZUKI, For LANDROVER, For CHRYSLER, For SUBARU, For Lancia, For Chevrolet, For SPRINTER, For KIA, For Cadillac, For SMART(SMART), For JPISUZU, For Buick, For SKODA, For Jeep, For BUGATTI, For SEAT, For JAGUAR, For BMW, For SAMSUNG, For Infiniti, For BENZ, For SAAB, For HYUNDAI, For AUTOSEARCH, For RENAULT, For HONDA, For AUSTFORD, For PORSCHE, For Gmsa, For AUDI, For PEUGEOT, For GM, For Alfa Romeo, For OPEL, For FIAT, For ACURA, For Nissangtr, For Euroford, For Abarth

LAUNCH CRP129E PLUS Parameter:

Screen:5.0 inch 720P LCD touch screen display
OS : Android 7.0
Battery : 6100mAH
Memory : 16GB
OBD II interface input voltage: 9V~18V DC input voltage: 5V
Connection:standard 16 PIN OBD diagnostic interface
Working temperature:-10°C to 50°C
Storage ambient temperature:-20°C to 70°C

LAUNCH CRP129E PLUS Packing List

1 x Creader Professional 129E Plus handset
1 x OBD II diagnostic cable
1 x DC 5V charging cable
1 x User manual
1 x Carrying bag