★★This cable is an OTG audio decoder. Support DAC decoder/sound card/USB microphone, etc.
【Charging and fast charging are not supported. Apple Mac series is not supported. The Type-C interface ipad series is not supported.】
–Lightning to Type-C. Lightning is the OTG terminal. It is only connected to the iPad or iPhone. The Lightning interface on other devices cannot be used.
–Type-C to Type-C supports Windows system computers connected to decoders/sound cards/printers/keyboards, etc.
NOTE
▲Please allow 1-3cm (0.4-1.18″) difference due to manual measurement and slight color variation for different display setting.
▲There are 2 types of interface shell styles, as shown in the following figure. Models are shipped randomly. Friends who mind do not place an order
Specifications
Interface type:type c to type c
Wire:mogami w2534
Wire diameter:6.0mm
Wire material:OFC(Oxygen free copper)
Plug:Gold-plated USB coating 3U
Plug material:Copper
Welding:Hand soldering using 5% silver solder
▲If you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you.
Introduction
▲NEGLEX type Quad Cables have been developed for the highest quality recording applications where maximum definition of recorded sound is of critical importance. Special proprietary materials & construction methods make those state-of-the-art mic. cables a must for direct to DISC and digital recording. Basic matters of flexibility, microphonics and shielding effect have been designed to meet international professional requirements. A Balanced quad structure is effective for high definition sound transmission as well as in canceling electromagnetic induction caused by nearby equipment such as floodlight projection, and therefore is well adapted to motion picture and TV studios.
▲Cable NEGLEX No.2534 has become popular around the world as the standard for high quality digital and analog recording. The cable has also become popular for use with unbalanced equipment, such as high quality pre-amp, amp inputs and tape decks.
A. 100% spiral oxygen-free copper shield
The shielding layer adopts ultra-high-density spider spin oxygen-free copper shielding. The design of this shielding layer is superior to the sound quality of aluminum foil or braided shielding, and can effectively shield electromagnetic and radio frequency interference. Avoid annoying background noise, hum, hum.
B. High temperature resistant insulating layer
The insulating layer uses xLPE (cross-linked polyethylene), which has very good electronic properties and can prevent the shrinkage of the wire when it is welded at high temperature.
C. Oxygen-free copper core
OFC oxygen-free copper core. Although the copper content is as high as 99.99%, the signal loss is small and the sound is more pure.
D. Soft PVC
Wear-resistant, easy to bend, long service life of wire.
▲The lightin / type-C connecting joint adopts the shell design of the whole basin, which can ensure long-term reliability and convenience.
▲The plugs have beautiful nickel plated copper tin alloy grip barrel, and the granular surface can avoid finger sliding.
▲The length of the holding barrel exceeds that of the outer conductor sleeve, so the RF screen closing is improved.
▲It has a smooth appearance and is made of nickel plated alloy, which can prevent static electricity and electromagnetic nois
▲The traditional USB connector is usually used for USB 2.0 or lower. The type-C connector is usually used for USB 3.0 connector or higher, with higher upper limit of transmission rate and faster speed. At the same time, it can improve the stability of wire transmission, support the transmission of high-resolution lossless audio from mobile phones, tablets, MAC and other terminals, and support Apple Music lossless.
▲The welding is purely manual welding, and the solder joints are made of lead-free solder containing 5% silver with constant temperature welding, and each solder joint is full and smooth.
▲Each welding point is sealed with a heat shrinkable tube after welding to improve the oxidation resistance of the welding point and ensure a long sound
▲The same, while improving the tensile resistance and durability of the wire.
SPECIFICATIONS
▲Part No. :2534
▲No. of Conductor
Details:20/0.12 OFC
Size(mm2 ):0.226mm2 (#24AWG)
▲Insulation
Ov. Dia. (mm) :1.6(0.063″)
Material:XLPE( Cross-Linked Polyethylene )
Colors:Blue/Clear
▲Shield:Served Approx. 62/0.18A
▲Jacket
Ov. Dia. (mm) :6.0(0.236″)
Material:Flexible PVC
Colors:Black
Physical display